Leaching of zinc and germanium from zinc oxide dust in sulfuric acid-ozone media

A new process of leaching zinc oxide dust by ozone oxidation in a sulfuric acid system was studied. The main factors affecting the leaching rate, such as ozone time, leaching temperature, initial acidity, leaching time, and liquid/solid mass ratio, were comprehensively investigated. The results show that leaching efficiency depends on all the above factors. The optimum conditions for leaching Zn and Ge from zinc oxide dust are as follows: ozone time 10 min, leaching temperature 90 ℃, initial acidity 160 g/L, leaching time 60 min, and liquid/solid mass ratio 7:1. Under the optimum conditions, the leaching rates of Zn and Ge are 95.79% and 93.65%, respectively. The leaching rates of zinc and germanium in the ozone leaching are 4.05% and 10.49% higher than those of the atmospheric leaching, respectively. Therefore, it is determined that ozone in solution plays a key role in rapidly oxidizing sulfide and releasing encapsulated germanium. Sulfuric acid-ozone media can efficiently extract Zn and Ge from zinc oxide dust.     

电感耦合等离子体质谱(ICP-MS)法测定离子吸附型稀土矿中的浸出稀土元素

对浙江某地大量的离子吸附型稀土样品进行了稀土元素(Y,La,Ce,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu)的浸提和测定实验,实验对比了氯化铵和硫酸铵溶液对矿石中稀土元素的浸出性能,选择了杂质浸出较少的硫酸铵溶液作为浸出剂,对不同稀土含量的吸附型稀土矿进行了实验,浸出方法稳定,符合工业开采要求。实验了电感耦合等离子体质谱法测定浸出液中稀土元素分量的方法,浸出液经大比例稀释并酸化后测定,精密度较好,能满足离子吸附型稀土矿评价的质量要求,方法检出限(6σ)0.005~0.26μg/g,单元素测定精密度(n=6,RSD≤6.0%),浸出稀土元素总量测定RSD≤4.0%。实际样品的实验及测定结果满意。     

The effects of flow rate and distance travelled on the mobility of phosphate in soils

Effects of flow rate and distance travelled on average mobilities of phosphate in a soil are estimated from breakthrough curves of phosphate at the outlets of small columns of soil, following step increases in the concentration at the inlets. Experimental results are compared with results from a computer simulation model of leached columns of soil.Average mobilities of phosphate in columns of soil, following a step increase in the input concentration, decrease with decreasing rate of flow and with increasing distance travelled and appear to be linearly correlated on a logarithmic scale with both flow rate and distance travelled. An empirical equation, describing these relationships, is fitted to data from leaching experiments at flow rates between 30 and 600 cm/day in 10 cm long columns of soil. Coefficients are obtained by curve fitting breakthrough curves, calculated with a numerical computer simulation model, to experimental breakthrough curves. The fitted equation enables extrapolation to flow rates and travel distances that are more relevant to a field situation.     

The numerical analysis of water and solute movement in scale heterogeneous profiles

A computer based numerical method is presented for the analysis of water and solute movement in unsaturated heterogeneous porous materials. Such a method is necessary since, for those field studies where solute movement is of concern, the soil profiles under consideration are invariably heterogeneous. The numerical analysis is based on a general one-dimensional finite difference soil water flow model which includes a numerical technique combining the concepts of scale heterogeneity with an interpolative soil water hysteresis model. An explicit finite difference solute movement subroutine is incorporated into the unsaturated flow model to describe the transport of nonreactive solutes. A velocity dependent longitudinal dispersion coefficient is used in the solution of the hydrodynamic dispersion equation. The resulting hysteretic scale heterogeneous solute movement model permits the study of solute dynamics during infiltrating and redistribution in realistically complex spatially varying soil profiles. Results are presented for the leaching of both coarse grading to fine and fine grading to coarse sand profiles. Both vertical and horizontal profiles are studied using either a constant flux or a constant concentration input boundary condition. The four cases studied demonstrate the versatility of the numerical method and emphasise the substantial differences in transport behavior that can arise between heterogeneous and homogeneous profiles.Now with BHP Petroleum Pty. Ltd., GPO Box 1911R, Melbourne, Vic. 3001, Australia.     

Surface antimicrobial modification of polyamide by poly(hexamethylene guanidine) hydrochloride

Antimicrobial polyamide (PA) received much attention for the demand of packaging and biomedical fields. In this paper, an antimicrobial PA6 membrane was prepared via a surface chemical reaction. A highly effective antibacterial component (PHMG‐E) with terminal epoxy group was firstly synthesized via a reaction between polyhexamethylene guanidine hydrochloride (PHMG) and ethylene glycol diglycidyl ether (EGDE). Then, PHMG‐E was bonded on the surface of PA6 membrane with secondary amine reduced by borane‐tetrahydrofuran (BH₃‐THF). The antimicrobial rates of surface‐modified PA6 membrane (PA6‐PHMG) against Escherichia coli and Staphylococcus aureus were both higher than 99.99%, and the PHMG was non‐leaching due to the chemical bonding. The hydrophilicity of antibacterial PA6 membrane was also significantly improved and the mechanical performance became better.     

Chemical Characterization of Silage Effluents and their Influence on Soil Bound Heavy Metals

Abstract

Silage effluents, generated during silaging of various crops, are produced in high amounts in cattle breeding farms. Due to their acidity and high content of dissolved organic matter, they are causing disposal problems. On the other hand, their ability to mobilise soil bound trace elements (i.e. heavy metals) might be useful for the decontamination of polluted soils.

With an aim to perform metal leaching studies, silage effluents from various ensiled crops (maize, rape, grass, clover, sugar-beet leaves) were collected from Bavarian farms and analysed for their main inorganic and organic constituents. Important TOC sources (TOC concentrations from 13.9 to 53.6 gl^?1) are short chain aliphatic acids (concentrations between 235 and 638 mM·D1^?1; predominant compound: lactic acid), amino acids (ranging from 22.8 to 151 mM·D1^?1) and polypeptides (concentrations from 3.8 to 20.0 g·D1^?1).

The release of heavy metals from two adsorbents (bentonite and peat) and from a polluted soil under the influence of silage effluents was studied in batch tests. The leaching efficiencies for the soil bound metals increase following the order: sugar-beet leaves < clover < maize < rape < grass. The extraction rates obtained with grass silage juice are: Cd 74.7%, Zn 55.7%, Cu 53.5%, Ni 38.9%, Cr 12.7% and Pb 8.9%. After neutralisation the leaching rates dropped, with the exception of copper.     

超声波辅助萃取－高效液相色谱法测定食品中碱性玫瑰精

建立超声波辅助萃取—高效液相色谱法测定含辣椒食品中非法添加剂碱性玫瑰精的方法.样品经均质,辣椒面样品、辣椒油样品、红油豆瓣酱样品分别用乙腈:水=7:3(V/V)溶液、正己烷:50％乙醇=1:2(V/V)溶液、无水乙醇经超声波辅助萃取后,用高效液相色谱仪测定碱性玫瑰精.线性范围0.026～26 μg/mL,相关系数0.9...     

氧化钙对流化床燃煤飞灰中砷的淋滤特性影响

在实验室小型流化床实验装置上,利用添加氧化钙研究了原煤中钙硫比变化对燃煤过程中砷在飞灰中的富集规律和飞灰中砷的浸出特性的影响。实验结果表明,增加钙硫比能有效促进砷在飞灰中富集,降低砷的排放。砷与氧化钙的反应受制于钙的硫化反应控制。飞灰中砷的浸出与滤液pH值关系显著,碱性飞灰导致滤液pH值增大,能有效抑制飞灰中砷的浸出。碱性飞灰中砷的浸出历程为飞灰中砷在短时间内快速溶出;随着滤液pH值增大,溶出的砷与钙发生二次反应形成钙砷化合物沉淀,降低滤液中砷浓度。     

环境化学开放性实验设计:重金属污染土壤的化学淋洗*

介绍了一个开放性环境化学实验。该实验以被重金属污染的土壤为研究对象,分别使用稀盐酸、乙二胺四乙酸、氯化钙为淋洗剂,对其进行化学淋洗修复。通过电感耦合等离子体光谱仪分析比较修复前后土壤中铅、镉的含量,用以帮助学生加深理解配合/螯合作用、酸-碱反应、离子交换反应、胶体的性质、土壤重金属形态、土壤性质与组成等相关环境化学知识。实验所用的土壤样品由学生自选,不同类型土壤的理化性质影响淋洗效果,从而增加了实验结果的不确定性。本实验贴近学科前沿且联系工程实际,可激发学生独立思考和探索精神,提高学生的科研能力与解决复杂问题的能力。     

连续流动-分光光度法测定固体废物中氰化物浸出毒性的研究

建立了一种利用连续流动-分光光度法测定固废中氰化物的浸出毒性的方法,当氰化物浓度在0~200μg/L范围内,校准曲线的相关系数r为0.9998;方法的检出限可以达到0.33μg/L;不同浓度样品测定的相对标准偏差低于2.6%,实际固体废物样品加标回收率为96%~103%,方法精密度良好并且准确度较高;通过实际样品测定结果比对,证明方法与传统国家标准方法测定结果有着较高的吻合度,具有良好的应用前景。